Refreshed ABIv0 AROS

deadwood · 30376

« previous next »
Pages: 1 ... 15 16 17 18 19   Go Down

deadwood

  • AROS Developer
  • Legendary Member
  • *****
    • Posts: 1524
    • Karma: +118/-0
Reply #240 on: February 16, 2021, 12:46:40 PM
@all

I confirmed on my DELL laptops that DEV-7 is broken. I know what the problem is and I will publish next ISO for tests in coming days.


magorium

  • Legendary Member
  • *****
    • Posts: 632
    • Karma: +62/-0
  • Convicted non contributor
Reply #241 on: February 16, 2021, 07:41:18 PM
fwiw

test: dev7-deadw00d
host: linux64 debian deriviate
vm: virtualbox 6.1.18
usb 3.x: not detected at all (should it ?)
usb 2.x: detected but IO error on installing to USB pendrive (same as it always did with vbox)
usb 1.x: detected, installed to USB pendrive (same as it always did with vbox)
hdaudio: seem to work as expected

Native Boot:
Loops through usb controller devices, lots of output (too fast to read) for what seems like ages to finally up at the cat-eyes, expecting me to insert a bootable device.

note:
Icaros desktop 2.2.x boots and runs perfectly native from the same USB header, same goes for Icaros Desktop 2.3.

detail:
Mobile Intel HM55 Express Chipset, officially does not have USB 3.x support according to the specs but seems a custom add-on from the manufacturer (ASRock).
« Last Edit: February 16, 2021, 07:52:43 PM by magorium »


deadwood

  • AROS Developer
  • Legendary Member
  • *****
    • Posts: 1524
    • Karma: +118/-0
Reply #242 on: February 17, 2021, 01:37:18 PM
Hello,

New ISO for testing. This ISO should have USB 2.0 working under VMWare, VirtualBox and real hardware where it was already working (solving regression introduced in DEV-2)

https://axrt.org/development/AROS-20170402-5-DEV-8-pc-i386-boot-iso.zip

Also fixes icon for Development directory and makes development files being installed with InstallAROS.


magorium

  • Legendary Member
  • *****
    • Posts: 632
    • Karma: +62/-0
  • Convicted non contributor
Reply #243 on: February 17, 2021, 03:53:17 PM
Thank you deadw00d

Quote from: deadwood on February 17, 2021, 01:37:18 PM
This ISO should have USB 2.0 working under VMWare, VirtualBox and real hardware ..
If i select USB 2.0 controller in virtualbox then i am unable to wipe the disk.

I can produce an exact error message in case that i more convenient for you, but the gist of it is that aros report that is unable to access usbscsii device number 0, named du0 (while it is actually there as reported by hd-toolbox/info command).

Selecting USB 1.0 controller, and wiping the disk works as expected (and as it did before).


In conclusion:
test: dev8-deadw00d
host: linux64 debian deriviate
vm: virtualbox 6.1.18
usb 3.x: not detected at all (should it ?)
usb 2.x: detected but IO error on installing to USB pendrive (same as it always did with vbox). (?) Additionally now unable to wipe the disk.
usb 1.x: detected, installed to USB pendrive (same as it always did with vbox)
hdaudio: seem to work as expected

Native Boot:
Boots as expected. All tested software (wanderer, cli, hdtoolbox, sysmon, sysexplorer, demo's, hdaudio) works as expected. No extensive or specific tests where done.
« Last Edit: February 17, 2021, 09:28:13 PM by magorium »


aGGreSSor

  • Member
  • ***
    • Posts: 184
    • Karma: +25/-0
    • russian transit
Reply #244 on: February 17, 2021, 04:02:56 PM
Quote from: deadwood on February 17, 2021, 01:37:18 PM
New ISO for testing. This ISO should have USB 2.0 working under VMWare, VirtualBox and real hardware where it was already working (solving regression introduced in DEV-2)


VirtualBox USB 1.1 permanently work


VirtualBox USB 1.1 Sashimi


In the DEV-8 image the network stopped working "out of the box" and the problem with frozen in Warm restart returned (Quick test: "reboot" and press Enter from CLI).

InstallAROS installed Debugging tools, thank you! Unfortunately without a working network and USB Pen, it's useless.
I dragged reports through the Hard drive, but under the VirtualBox they had a size of 0 after rebooting from HDD.
« Last Edit: February 17, 2021, 04:14:09 PM by aGGreSSor »


AMIGASYSTEM

  • Global Moderator
  • Legendary Member
  • *****
    • Posts: 3741
    • Karma: +69/-2
  • AROS One
    • AROS One
Reply #245 on: February 17, 2021, 04:04:08 PM
Quote from: deadwood on February 17, 2021, 01:37:18 PM
Hello,

New ISO for testing. This ISO should have USB 2.0 working under VMWare, VirtualBox and real hardware where it was already working (solving regression introduced in DEV-2)

https://axrt.org/development/AROS-20170402-5-DEV-8-pc-i386-boot-iso.zip

Also fixes icon for Development directory and makes development files being installed with InstallAROS.

OK thank you

With DEV-8

VMWare 6.0.7=  Works well  USB1.1,  USB2.0 and  USB3.0

ACER Aspire One ZG5=  Works well  USB, Audio Card, Video Card, WiFi and Touchpad

Dell Inspiron Mini 910=  Works well  USB, Audio Card, Video Card, Touchpad No WiFi

Samsung R730= Works well  USB, Audio Card, No Video Card, WiFi, Touchpad


nikos

  • Senior Member
  • ****
    • Posts: 374
    • Karma: +71/-3
    • aspireos
Reply #246 on: February 17, 2021, 04:57:19 PM
Thanks Deadwood.

DELL Latitude D520, USB is working as normal again.


deadwood

  • AROS Developer
  • Legendary Member
  • *****
    • Posts: 1524
    • Karma: +118/-0
Reply #247 on: February 17, 2021, 11:39:14 PM
@all

Thanks for testing

@aGGreSSor

I reviewed past post and it looks like USB 2.0 under VirtualBox was working for you in DEV-3, DEV-5 and DEV-7. Do I read correctly that DEV-8 is a regression for you?


deadwood

  • AROS Developer
  • Legendary Member
  • *****
    • Posts: 1524
    • Karma: +118/-0
Reply #248 on: February 18, 2021, 03:25:37 AM
Quote from: magorium on February 17, 2021, 03:53:17 PM
Thank you deadw00d

If i select USB 2.0 controller in virtualbox then i am unable to wipe the disk.

I can produce an exact error message in case that i more convenient for you, but the gist of it is that aros report that is unable to access usbscsii device number 0, named du0 (while it is actually there as reported by hd-toolbox/info command).


Does partitioning from HDToolBox work? Is this just InstallAROS problem or general problem with partitioning?


Amiwell

  • Legendary Member
  • *****
    • Posts: 2616
    • Karma: +35/-4
  • Peace
Reply #249 on: February 18, 2021, 05:53:31 AM
ok deadwood i have no more problems with usb ports :)


aGGreSSor

  • Member
  • ***
    • Posts: 184
    • Karma: +25/-0
    • russian transit
Reply #250 on: February 18, 2021, 06:12:33 AM
Quote from: deadwood on February 17, 2021, 11:39:14 PM
I reviewed past post and it looks like USB 2.0 under VirtualBox was working for you in DEV-3, DEV-5 and DEV-7. Do I read correctly that DEV-8 is a regression for you?
No, they didn't work under VirtualBox, but it seems USB devices were at least bound to classes and with DEV-8, this definitely doesn't happen. Apparently for me the best was DEV-7 under VMware 15 Player. As far as I can tell, Poseidon is sorting through the drivers to play its own sound about connecting the USB device by default, that's all that can be seen.
« Last Edit: February 18, 2021, 06:17:00 AM by aGGreSSor »


nikos

  • Senior Member
  • ****
    • Posts: 374
    • Karma: +71/-3
    • aspireos
Reply #251 on: February 18, 2021, 10:04:24 AM
Quote from: nikos on December 13, 2020, 03:37:31 PM
Quote from: deadwood on December 13, 2020, 02:41:39 PM
@nikos

Hello Nikos, good to see you back. What network device did you use on your laptop?

Yes, correct as Salvo said, Atheros.
With Power Off my laptop freeze. Restart Computer, Restart AROS works perfect.
Are some things faster now? Everything seams stable and fast :)
I write this from Odyssey on your nice build :)

Edit: Great news :) It is definatly faster!!  I had a video where I recorded GPmark tests around 3 years ago. All tests with Deadwoods latest builds show a boost at around 10%. That is massive :)

I had some time to test a little now. I forgot that I changed the CPU on the laptop so it is not faster than before. I do not want to spread false info. The speed with latest backports from abi v.1 is exactly the same as from some years back regarding 3D, fps. This is IntelGMA.


deadwood

  • AROS Developer
  • Legendary Member
  • *****
    • Posts: 1524
    • Karma: +118/-0
Reply #252 on: February 18, 2021, 10:56:14 AM
Quote from: nikos on February 18, 2021, 10:04:24 AM

I had some time to test a little now. I forgot that I changed the CPU on the laptop so it is not faster than before. I do not want to spread false info. The speed with latest backports from abi v.1 is exactly the same as from some years back regarding 3D, fps. This is IntelGMA.

Thanks for clarifying.


deadwood

  • AROS Developer
  • Legendary Member
  • *****
    • Posts: 1524
    • Karma: +118/-0
Reply #253 on: February 18, 2021, 10:59:13 AM
Quote from: salvo on February 18, 2021, 05:53:31 AM
ok deadwood i have no more problems with usb ports :)

Thx


deadwood

  • AROS Developer
  • Legendary Member
  • *****
    • Posts: 1524
    • Karma: +118/-0
Reply #254 on: February 18, 2021, 11:01:20 AM
Quote from: aGGreSSor on February 18, 2021, 06:12:33 AM
Quote from: deadwood on February 17, 2021, 11:39:14 PM
I reviewed past post and it looks like USB 2.0 under VirtualBox was working for you in DEV-3, DEV-5 and DEV-7. Do I read correctly that DEV-8 is a regression for you?
No, they didn't work under VirtualBox, but it seems USB devices were at least bound to classes and with DEV-8, this definitely doesn't happen. Apparently for me the best was DEV-7 under VMware 15 Player. As far as I can tell, Poseidon is sorting through the drivers to play its own sound about connecting the USB device by default, that's all that can be seen.

What is your host operating system?


Pages: 1 ... 15 16 17 18 19   Go Up
« previous next »